[giaban]Giá: Liên hệ[/giaban]
[hinhanh]
Xuất xứ: USA
Bảo hành: 12 tháng
Feature:
Very low pressure output ranges
Excellent set point stability
Adjustable DC motor speed
Output pressure locks in last position in event of power failure.
Standard commercial enclosure or Explosion-proof NEMA 4X housing
End of travel limit switches
[/tomtat]
[kythuat]
[mota]
Catalogue
[/mota]
[kythuat]
Công ty Pitesco là nhà XNK hàng đầu và là nhà cung cấp chuyên
nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng
mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực.
Liên hệ cho chúng tôi theo số 0972 064 954 | 0914 237 179 để CÓ thông tin mà Quý
khách CẦN.
-
Mr Mai Nghĩa -
< Sales
Engineer>
Email : nghia@pitesco.com
Skype : nghia.pitesco
Email : nghia@pitesco.com
Skype : nghia.pitesco
Benefits:
Excellent choice for low pressure automation systems
Accurately maintains low pressure set points
Users can determine desired rate of increase or decrease in pressure
Safe, predictable and reliable operation
Designs available for use in common, hazardous or harsh environments
User selectable setting of minimum and maximum pressure values
The Model 2400 M/P Low Pressure Converter is also a motorized regulator, however, this unit uses a larger diaphragm regulator as its pressure control device to facilitate high accuracy set point control. The pneumatic control circuit is isolated from any explosive environment by enclosing the motor and associated electronics an explosion-proof housing. The Stepper Motor configuration is equipped with a clock generator positioned horizontally, which plugs into a vertically mounted translator board. The configuration includes limit switches. The Stepper Motor is mounted on the bottom of the motor assembly in the base of the explosion-proof housing. Wiring to the unit is made to a terminal board through a 1/2" - 14 NPT conduit fitting in the base of the housing. The large diaphragm regulator attaches to the motor housing and provides precision control in three (3) available pressure ranges, from 0-20 in water column, up to 0-5 psi. In these configurations, the MP2400Low Pressure motorized regulator will handle a supply pressure up to 150 psi, 10BAR, 1000 kPa.
[/kythuat][mota]
Catalogue
[/mota]