[giaban]Giá: Liên hệ[/giaban]

[hinhanh]



  [/hinhanh] [tomtat] Giá: Liên hệ
Xuất xứ: Germany
Click on image to view large image

Bảo hành: 12 tháng
[/tomtat]

[kythuat]

Công ty Pitesco là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực. 
Liên hệ cho chúng tôi theo số 0972 064 954  | 0914 237 179  để  thông tin mà Quý khách CẦN.  
- Mr Mai Nghĩa -
< Sales  Engineer>
Email : nghia.pitesco@gmail.com 
Yahoo :  nghia.pitesco
Skype :   nghia.pitesco
web: pitesvietnam.com
The PF4 series is the latest development from ROTRONIC. The thermal measurement technique enables top-precision measurements in the smallest of spaces. This differential-pressure transmitter gives ROTRONIC customers a device to measure a further important parameter in addition to devices for humidity, temperature and CO2 measurement. With the optional connector for HygroClip2 probe, analog input or temperature sensor, the device is widely supported for the most diverse applications.
ROTRONIC stands for unparalleled accuracy and long-term stability. The new differential pressure series meets these requirements with a long-term stability of <0.3 %/year and an accuracy of ±1.0 % of full scale.
Applications
The ROTRONIC differential-pressure transmitters are ideal for clean rooms, operating rooms and applications where even minor differences in pressure can have a big effect.
Features
• High-precision measurement and long-term stability
• Fast response time and low hysteresis
• Analog signals freely configurable
• Integrated relay switch contact
• Large overload range
• Expandable with HygroClip2 sensor or analogue inputs
• High immunity to dust and humidity in the medium

Dimensions129 x 72 x 45 mm
Weight240 g
Range of application0...70 °C / 0…90 %rh; 0...60 °C / 0…90 %rh with display
Accuracy at 23 ±5 °C±1.0 % of full scale @ 23 °C ±3 K
InputsDifferential pressure, hose connections, 4 mm internal diameter Optional: HygroClip2 / analog input 1 Pt100 connection, 4-wire
Measuring range-25...+25 Pa / -50…+50 Pa -100...+100 Pa / -250...+250 Pa -500…+500 Pa -100...200 °C (probe-dependent) 0...100 %RH (with HC2)
Pressure dependency0.1 %/hPa
Pressure resistance2 bar (2'000 hPa)
Air flow120 - 180 μl/min
Accuracy analog output±10 mV (voltage output); ±20 μA (current output)
Switch output1 relay, Time delay, duty cycle, resetting configurable
Switching capacity<50 VAC / <75 VDC / <1 A
Power supply15…40 VDC / 14…28 VAC
Current consumption<70 mA / <150 mA (with Ethernet)
Long-term stability sensor<0.3 %/ year
Response time t 63<10 ms (only sensor element)
Alarm functionsConfigurable relay, HW4
Type of output signalsVoltage, current, digital (optional)
Analog output signal (standard)0…1 V, 0…5 V, 0…10 V, 0(4)…20 mA
Communication interfacesEthernet (optional)
HousingABS
Cable connections1 x M16, terminal
IP protection ratingIP65
FDA / GAMPFDA 21 CFR part 11 / GAMP5
Temperature adjustmentSingle-point
CE / EMC conform2004/108/EC
[/kythuat]

[mota]
Catalogue


PF4 - Datasheet(PDF, 833.85 KB)8/20/14
PF4 - Short instruction manual(PDF, 689.98 KB)3/28/14
PF4 - CE declaration(PDF, 177.23 KB)12/2/14
PF4 - Manual(PDF, 956.66 KB)5/21/14

[/mota]

Copyright 2014 Pites. Design by NghiaMai