Công ty Pitesco là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực.
The insertion probe is suitable for measurement in dust-free bulk materials, bricks, concrete, etc. It measures humidity and temperature and calculates the dew/frost point.
Applications
Water activity measurement, mobile measuring units with handheld instruments and data loggers
Features
• Range of application: -40…85 °C / 0…100 %rh
• Digital interface (UART) and scalable analog outputs, 0…1 V
• Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
• Adjusted at 23 °C and 10, 35, 80 %rh
Dimensions | ∅ 5 x 200 mm |
Weight | 160 g |
For use with | HygroLab C1, HP23-AW-A |
Operating range electronics | -40…85 °C / 0…100 %rh |
Range of application | -40…85 °C (-40…185 °F) / 0…100 %RH |
Accuracy at 23 ±5 °C | ± 0.015 aw / 1.5 %rh / ±0.3 K |
Power supply | 3.2…5 VDC, calibrated at 3.3 VDC, current: ~4.5 mA |
Long-term stability sensor | <1 %rh / year |
Humidity sensor | HYGROMER® WA-1 / Pt-100, 1/3 DIN Class B |
Temperature dependence | 0.001 K/K, 0.0002 aw/K |
Filter type | No filter available |
Response time t 63 | <15 sec. |
Psychrometric calculations | Dew or frost point |
Start-up time | 1,5 s |
Measurement interval | 1 s |
Material | Stainless steel DIN 1.4305 (probe), POM (handle) |
IP protection rating | IP30 |
FDA / GAMP | FDA 21 CFR part 11 / GAMP5 |
CE / EMC conform | 2007 / 108 / EG |