[giaban]Giá: Liên hệ[/giaban]


  [/hinhanh] [tomtat] Giá: Liên hệ
Xuất xứ: Germany
Click on image to view large image

Bảo hành: 12 tháng


Công ty Pitesco là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực. 
Liên hệ cho chúng tôi theo số 0972 064 954  | 0914 237 179  để  thông tin mà Quý khách CẦN.  
- Mr Mai Nghĩa -
< Sales  Engineer>
Email : nghia.pitesco@gmail.com 
Yahoo :  nghia.pitesco
Skype :   nghia.pitesco
web: pitesvietnam.com
The insertion probe is suitable for measurement in dusty bulk materials, flour, sugar, etc. It measures humidity and temperature and calculates the dew/frost point.
Water activity measurement, mobile measuring units with handheld instruments and data loggers
• Range of application: -40…85 °C / 0…100 %rh
• Digital interface (UART) and scalable analog outputs, 0…1 V
• Standard output scaling: 0…1 V = -40…60 °C / 0…100 %rh
• Adjusted at 23 °C and 10, 35, 80 %rh

Probe typeInsertion probe
Dimensions280 mm / 500 mm
Weight200 g
For use withHygroLab C1, HP23-AW-A
Operating range electronics-40…85 °C / 0…100 %rh
Range of application-40…85 °C (-40…185 °F) / 0…100 %RH
Accuracy at 23 ±5 °C± 0.008 aw / 0.8 %rh / ±0.1 K
Accuracy w. adjustment profile "standard"at 23 °C / 10, 35, 80 %rh ± 0.8 %rh / ± 0.1 K
Power supply3.2…5 VDC, calibrated at 3.3 VDC, current: ~4.5 mA
Long-term stability sensor<1 %rh / year
Humidity sensorHYGROMER® WA-1 / Pt-100, 1/3 DIN Class B
Temperature dependence0.001 K/K, 0.0002 aw/K
Temperature sensorPT100 1/3 DIN Class B
Filter typeSintered steel with 5 μm pore size
Response time t 63<20 s, with filter
Allowed wind speed40 m/s, with filtre
Psychrometric calculationsDew or frost point
Reproducibility Airchip<0.02 %rh / 0.01 K
Start-up time1,5 s
Measurement interval1 s
Exploitation softwareROTRONIC HW4.2
Probe adjustment by software1 Point & multipoint %rh & °C
Firmware updateWith internet and HW4 software
User informationfrom Software HW4 (devicemanager)
Data processing via HW4with interface cables
Device Protection by passwordYes
Type of output signals2 x 0…1 VDC
Analogue outputs scaleable by the userYes
Analog output signal (standard)0…1 V = 0…100 %rh; 0…1 V = -40…60 °C
Digital output signal (standard)UART
Service InterfaceUART
Reverse voltage protectionMechanically in the connector
Max. cable length5 m
Probe materialStainless steel 1.4305 (V2A)
Enclosure materialPOM
MaterialStainless steel DIN 1.4305 (probe), POM (handle)
IP protection ratingIP50
FDA/GAMP compatibilityFDA 21 CFR Part 11 and GAMP compatible
FDA / GAMPFDA 21 CFR part 11 / GAMP5
CE / EMC conform2007 / 108 / EG


Water activity - Data sheet(PDF, 2.07 MB)7/5/12
HC2 - Data sheet(PDF, 766.1 KB)4/1/14
HC2 - Manual(PDF, 1 MB)4/1/14


Copyright 2014 Pites. Design by NghiaMai