Công ty Pitesco là nhà XNK hàng đầu và là nhà cung cấp chuyên
nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng
mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực.
Liên hệ cho chúng tôi theo số 0972 064 954 | 0914 237 179 để CÓ thông tin mà Quý
khách CẦN.
-
Mr Mai Nghĩa -
< Sales
Engineer>
Email : nghia@pitesco.com
Skype : nghia.pitesco
Specifications
Heating | Heat transduction through aluminum block |
Temp. Range | ambient + 10°C ~ 150°C |
Accuracy | ± 0.1°C at 37.0°C
± 0.2°C at 90.0°C ± 0.4°C at 135.0°C
|
Control | Advanced MCU processor with Timer |
Sensor | Class A Pt-100 Ω Sensor |
Safety | Over-Temperature Cut-Off |
| Over Current Cut-Off |
Material | Body - ABS Plastic |
| Bath – Heat Resistant PPS Plastic |
| Block – Anodized Aluminum |
Electric | 220±10% VAC 50/60Hz 1-Phase |
Plug config. | CEE 7/7 Schuko |
Models
Art. No. | JSDB-01T |
Temperature Control | |
Temp. Range | Ambient +5°C to +150°C |
Temp. Accuracy | ±0.1°C at 37°C |
| ±0.2°C at 90°C |
| ±0.4°C at 135°C |
Resolution | 0.1°C Display, 0.1°C Control |
Heat up speed | Approx 5°C /min |
| |
Dimensions | |
Block (W x D x H) | 120 x 92 x 40 / 50 mm |
Outer (W x D x H) | 170 x 250 x 145 mm |
| |
Controller | |
Type | Digital Fuzzy Control with Capacitive Touch Button and Jog Dial |
Timer | 99hr 59min by 1 min division |
Display | Full Size Digital Back Light LCD Display |
| Independent ON/OFF Switch |
| |
Heater | |
Type | Molded heater |
Heater Output | 300 Watt |
| |
Safety Data | |
Safety Device | Over Temperature Protection |
| Over Load Protection |
| Over Current Protection |
| |
Material Data | |
Body | ABS |
Block Bath | PPS |
Lid | Polycarbonate |
Block | Anodized Aluminum |
| |
Electrical Data | |
Rated voltage [V] | 230 ± 10% VAC |
Power frequency [Hz] | 50/60Hz |
Nominal power [W] | 300 |
Unit fuse [A] | 0 |
Phase (Nominal voltage) | 1~ |
Plug configuration | CEE 7/7 Schuko or BS 1363 |
| |
Usable Condition | |
Temp. & Humidity | 5oC - 40 oC, < 80% RH |
| |
Packaging Data | |
Shipping Dims. (W x D x H mm ) | 320 x 230 x 260 |
Type of packaging | Carton |
Net Weight (kg) | 1.6 |
Shipping Weight (kg) | 2.1 |
Ordering Information
Art. No. | Descriptions | Voltage |
JSDB-01T-PK | Dry Bath Heating Block SET | 230 VAC 1~ ph 50/60Hz |
including | PHB-20 Microtube Block 1.5/2.0ml, , Ø11 x 48 hole (H36mm) | |
| | |
JSDB-01T | Dry Bath Heating Block MAIN BODY ONLY | 230 VAC 1~ ph 50/60Hz |
| | |
Optional Accessories
Art. No. | Descriptions |
PHB-02 | Microtube Block for 0.2ml Tubes, Ø6 x 96 hole (H16mm) |
PHB-05 | Microtube Block for 0.5ml Tubes, Ø7.7 x 63 hole (H29.5mm) |
PHB-20 | Microtube Block for 1.5/ 2.0ml Tubes, Ø11 x 48 hole (H36mm) |
PHB-15 | Conical tube Block for 15ml Tubes, Ø16 x 15 hole (H47mm) |
PHB-50 | Conical tube Block for 50ml Tubes, Ø28.7 x 8 hole (H47mm) |
PHB-1248 | Standard test tubes Block, Ø12 x 48 hole (H35mm) |
PHB-1330 | Standard test tubes Block, Ø13 x 30 hole (H47mm) |
PHB-1530 | Standard test tubes Block, Ø15 x 30 hole (H47mm) |
PHB-1624 | Standard test tubes Block, Ø16.5 x 24 hole (H47mm) |
PHB-1824 | Standard test tubes Block, Ø18 x 24 hole (H47mm) |
PHB-100 | Block Extraction Knob |