For optimum quality and process protection, the avoidance of oxygen, also as traces, is necessary in many technological applications. Due to the increasing adoption of quality management systems (e.g. ISO 9000), a constant monitoring and documentation of quality parameters becomes more important. The oxygen measuring module ZR5 is based on the approved zirconia technology. It serves the continuous measurement of oxygen concentration in industry and laboratory gases and the monitoring of protective gases. Deviations of the oxygen concentration from set points can be signalized, the ZR5-module can monitor the procedure of special production processes under inert gas.
Thông số kỹ thuật Oxygen Measuring Module ZR5
Sensor | potentiometric zirconia cell |
Range | 1 Vol.-ppm...100 Vol.-%, 10-15 Vol.-ppm...20.6 Vol.-%(1) |
Accuracy | rel. error < 5 % |
T90 | T90 ≤ 1 s (measuring cell without tube) |
Housing | 19''-slot (21 TE) |
Gas connection | input: Swagelok 3 mm, output: tube nipple 4 mm |
Gas flow | 8 ± 2 l/h, controlled via internal pump (can be turned off) |
Signal output | analog: 0/4...20 mA for O2 (digital: RS 232 as option) |
Power supply | 24 V DC (± 20 %) |
Display | LED for failure display only |
Protection degree | IP20 |
Working conditions | 0...50 °C, max. 80 % rel. humidity |
Storage conditions | -20...60 °C, max. 95 % rel. humidity |
Dimensions (W x H x D) | 100 mm x 105 mm x 170 mm |
Warm-up | < 15 min |
Power consumption | approx. 20 W |
- (1) On request (for reducing gas mixtures)