The hydrogen sensor TCS (thermal conductivity sensor) is a compact measuring device, which is directly mounted on the measuring chamber by vacuum components.
The sensor is pre-thermostatted by its own electronics, whereby a very high stable sensor signal is ensured.
Originally developed for nitriding equipment of contract heat treatment workshops, the sensor is applicable for special measuring problems (e.g. low pressure application) due to a sophisticated calibration method.
Thông số kỹ thuật H2-Measuring Device TCS
| |
Range | 0...100 Vol.-% |
Accuracy | rel. error < 5 % |
Response time | t90 (sensor) approx. 180 s (depends on gas distribution at measuring chamber) |
Sensor temperature | 50 °C (pre-thermostatted, electronically controlled) |
Dimensions (WxHxD) | 80 mm x 125 mm x 83 mm |
Signal output | analog output 0/4-20 mA (scaling by software) and serial interface RS232 (0-5/10 V on request) |
Power supply | 24 V DC +/- 20 %, approx. 20 W |
Display | none, operation via software |
Protection degree | IP 65 |
Ambient temperature | 10...50 °C, rel. humidity 0...95 % at 20 °C |
Storage temperature | -20...60 °C, rel. humidity 0...95 % at 20 °C |
Gas connection | via DIN40KF (others on request) |
Gas supply | via diffusion (Gas distribution at measuring chamber) |
Ambient pressure | 950...1100 hPa (Low pressure applications need special calibration) Note: Measuring value depends on pressure |
Warm-up | 10 min. |
Calibration | first calibration (characteristic line determination) by manufacturer, a 2-point-calibration approx. every 3 month (process pressure must be known and provided to manufacturer) by user |
Mounting | no requirements |
Cross-sensitivity | Gases with high thermal conductivity falsify the measuring result |
Link tải catalogue:
Data sheet