[giaban]Giá: Liên hệ[/giaban]

[hinhanh]



  [/hinhanh] [tomtat] Giá: Liên hệ
Xuất xứ: Germany
Bảo hành: 12 tháng
[/tomtat]

[kythuat]
Công ty Pitesco là nhà XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng tự động, thiết bị điện và điện công nghiệp. Chúng tôi đáp ứng mọi xu hướng công nghiệp hóa, hiện đại hóa cũng như mọi lĩnh vực. 
Liên hệ cho chúng tôi theo số 0972 064 954  | 0914 237 179  để  thông tin mà Quý khách CẦN.  
- Mr Mai Nghĩa -
< Sales  Engineer>
Email : nghia.pitesco@gmail.com 
Yahoo :  nghia.pitesco
Skype :   nghia.pitesco
web: pitesvietnam.com

Specifications

  • Capacity 10 - 500 hl/h
  • Pasteurisation temperature 75 - 95°C
  • Pasteurisation time 30 - 90 sec.
  • max. CO2-content: 10 g/l
  • Regeneration degree 85 - 97 %
  • Cooling medium Ice water; glycol; ammonia; others on request
  • Heating medium Steam 2-6 bar; hot water; others on request
  • Operating pressures 0 - 8 bar
  • Nominal diameters DN 25- DN 100 [mm]
  • Materials AISI 304 (1.4301);  AISI 316L (1.4403) other on request

Description

The Flash Pasteuriser is a modular and fully automatic system for pasteurising beer, softdrinks and other carbonated products.
The System is able to cope with variations in flow for example in front of a filler and offers highly accurate control of the pasteurisation parameters. Heating and cooling is performed by plate heat exchanger. The plates are designed for maximum heat transfer and low pressure drop. Advantages for the operator are maintenance free, full automatic operation and the small foot print.

The Flash Pasteuriser is a fully automatic system to pasteurise beer, softdrinks and other carbonated products. The system is sanitary designed and provides an effective as well as gentle product treatment. The energy consumption is low due to the used 3 sections plate heat exchanger. A 4-way mixproof valve enables a safe start up with only a very low loss of sterilised product. In the start up mode water runs in a loop through one section of the heat exchanger until sterile temperature is reached. After that the system switches to the normal production mode and the water is pushed out by product.The capacity of the system is automatically adjusted according to the flow rate. By utilising a buffer tank after the FPS system as an option, it is possible to install the system directly in front of the filler.An optional remote access service kit allows software updating and trouble shooting within a few hours.
[/kythuat]

[mota]
Catalogue
[/mota]

Copyright 2014 Pites. Design by NghiaMai